|
|
 Ref: mk5328
GOSS
Suburban 70
SPECIFICATION
| |
|
|
| Age: |
|
1997/98 - 2000 |
| |
|
|
| Cutoff: |
|
620mm |
| |
|
|
| Web-width: |
|
Max. 1000mm |
| |
|
|
| Speed: |
|
|
| |
|
|
| Equipment: |
|
3 x 1020mm wide MEGTEC DLP Splicers (one single and one double)
1 x (Indramat) shaftless 4-high tower with independent motors
• (has Quad-Tech page register, but no 4-colour register, no motorised circumferential or lateral register – this must be performed manually)
• Technotrans spray dampening with Goss spray bars
• Ink key control by closed loop systems with remote desk
• One control consoles, with software control of units and folder clutches, sequential start-up and good copy selection
• Programmable automatic blanket wash by Baldwin Impact System with impregnated cloth
1 x Goss J-233 single collect or straight folder
• Both press folders have tabloid and ¼ fold
• one folder has double parallel
Allen Bradley RSLogix 500 plc operating system (services both presses)
Additional extras: The following are considered additional extras unless both presses are purchased together, in which case these are included:
• Prazision 2B Pneumatic Punch (1998)
• Prazision 2B semi-auto double-edge plate bender (1998)
Typical pagination: with both presses:
o 2 x 96pp mono, 2 x 96pp with 2 x 32pp spot colour, 2 x 64pp spot colour, 2 x 32pp 4-colour
Notes: This press is used for printing directories. As such it is configured to produce 1/1 work with spot colour. The top two units are used as 1/1 mono units, whilst the bottom two units are configured to run together as a mono and spot colour (2nd unit up) for 2/1 colour. 4 colour work (set up manually) is of course possible through the tower.
Whilst the RTF's, folders and print couples have independent motors, the duplex press uses one plc drive and as such cannot be split in half without purchasing another drive system.
|
| |
|
|
| Condition: |
|
|
| |
|
|
| Available: |
|
|
| |
|
|
| Price: |
|
July 2007 |
| |
|
|
|
|
|
|
Location:
|
